September 27th. Tech Night

We had good attendance at the Technical Night held on 27 September 2018.  At the meeting, NOARC  members were introduced to an antenna that many of the experienced club members had built as their first amateur radio antenna — a 2-meter, vertical, ground-plane antenna constructed from an SO-239 coax connector 12 AWG copper wire.W4BZM provided a short discussion on the theory of a ground-plane antenna, and KK4KRZ explained the twisting of the wires for rigidity and provided several twisted wires for use.The parts kits of connector, antenna wires, and hardware were then distributed.  Six members constructed antennas and tested them using antenna analyzers, and four more kits were purchased by members for later assembly.Thank you to KK4KRZ and KI5FR for providing extra parts, tools, and antenna analyzers for use on this project.Mike Behr W4BZM

Programming memories into your Baofang by hand

Sept 15th Station Opening

This morning there were ten hams at The Station: KA5DLV, KM4OZK, N4CU, N4FQJ, KM4JJS, N4GXX, KN4OPX (New ham Van), KJ4RWD, KJ4PIU AND KE4BFX.The session opened up with a topic from N4CU on operating your HT with the antenna vertical and also horizontal.  We talked about the power loss and the “coolness” factor.The presentation (which is attached) went well, with plenty of questions.  We even had questions “before” the session started.  We got into some of the common menuing items to program a  memory, plus the high level variances between a Baofang and one of the big three radios (Icom, Yaesu, Kenwood).   There was also discussion on the effectiveness of getting packages (cable and software) from RT Systems, and the effectiveness of using CHIRP for managing radio memories.I actually walked away with one additional radio to program.Thanks to all that showed up!  I believe next week is “The Antenna Tuner Tuner”, by President Ron.73, and take care,Bruce